Interior Door
(215)
Exterior Door
(71)
Cabinet Door
(59)
Painted Door
(40)
Glass Door
(3)
Plywood Door
(13)
Solid Wood Doors
(64)
kitchen Door
(5)
Simple Door
(87)
Room Door
(75)
Steel Door
(18)
Flush Door
(14)
Paint the Door
(88)
Wenqi Door
(88)
Bathroom Door
(25)
Move the Door
(5)
Original Wood Door
(27)
Frame Fittings
(11)
Bathroom Cabinet
(4)
Bookcase
(6)
Door Panel
(32)
Parlour Cabinet
(11)
Slot Board
(3)
Wallboard
(2)
We are professional Melamine panel&Laminated panel manufacturers in China. You can find more other Door Panels in www.china-door-manufacturer.com
Today I will tell you how to Remove Door Panels.
One of the easier car repair jobs, removing door panels can be done by yourself. Follow instructions on how to remove car door panel mentioned in this article.
Step 1
Before removing door panels from your car, you should figure out how these panels are fitted in the car. A majority of panels are attached with screws and bolts, while a few of them have snap-in fittings. Accordingly determine what tools to keep with you while going about the task. For snap-in fittings, a screwdriver (flat-headed) should be enough, while you would require a ratchet or socket to remove screws and bolts.
Step 2
Normally, screws and bolts are present near the door lights or below the arm rest area. Find out their exact location. Bring down your car windows and start removing screws and bolts, which are keeping your door panel attached to your car. In case your car has snap-in fittings, pry them out from the bottom corner of your door panel. In case you have power windows, take out it's control panel.
Step 3
If your car has manual windows, you will have to locate the manual window crank, using a flashlight. With the help of a 'L' pick to remove the metal clip which keeps the crank in it's position. Once the clip is removed, simply pull the crank out.
Step 4
Next, you will have to take out the door handle. Use your screwdriver to unscrew a small screw you will find at the center of the handle. Carefully pull the door handle and after it is slightly out, remove the clip from behind it to release it from the rod. After this, remove screws from the door panel lock.
Step 5
Once everything is removed, gently take the door panel off by prying on its bottom edge. Pull it upwards and take it out with your hands. Your car door panel removal mission is accomplished.
